C18 · Apparel & Garment

Stainless Steel Plates for Textile and Apparel Industry: 304/201 Selection and List of Three Parts

In the textile and apparel industry, we have organized three parts using stainless steel: commonly used 304 / 201 with thickness ranging from 0.3–3 mm.

Describe operating conditions to obtain material recommendationsView Products
Stainless rollers and cylinders for light industry production lines
Light industrial line: Stainless rollers, cylinders, and frames (schematic; actual selection based on medium, temperature, and drawings)

Three parts and material list

Part / ComponentRecommended gradeSize / ThicknessSurfaceMain Failure ModesReference Standards
Chain Head/Chain Tooth304/2010.3–1.5mmPolishing/Glazing/Dielectric CoatingRepeated Pulling and Squeezing + Sweat Cl⁻ CorrosionQB/T 2171
Buttons/Nails/Snap Eyes304/2010.3–1.0mmMirror Finish/Rubbed FinishSweat + Laundry Detergent + FrictionQB/T Standard Series
Pouch Buckles/Bag Hardware304/2010.8–3.0mmPolished/Glazed/Dielectric CoatedLoad Bearing + Sweat + Leather Tanning AgentQB/T 1333, etc.
Table Below isStandard Configuration. The same part may switch from 304 to 316L or 2205 based on usage conditions —— Explain the conditions clearly rather than specifying grades.

Material Selection Tips

  • Common Steel Types: 304 (3), 201 (3)
  • Thickness Range: 0.3–3 mm

Common Issues

Which stainless steel is used most in textile and clothing industries?
Top 3 parts by quantity: 304 (3 items), 201 (3 items). Specific part may vary based on media and temperature, e.g., stainless countertops exposed to saltwater should switch from 304 to 316L.
Which part is most prone to issues?
Typical issue: "Pull-tab head/pull-tab tooth" - repeated opening/closing wear + sweat chloride corrosion. Recommended type: 304/201, thickness range: 0.3–1.5 mm. This scenario requires specifying media concentration, temperature, and cleaning method in the design phase.
What thickness should I select?
Thickness range in the list is 0.3–3 mm. For thin plates, consider bending and surface finish; for thick plates, welding and structural strength. Values may vary by equipment manufacturer for the same location. Recheck with your drawing or operating conditions.

Related Materials and Adjacent Industries

201Materials and Specifications304Material and SpecificationsAgricultural Food ProcessingFood ProcessingFood ManufacturingFood ManufacturingBeer, Beverage, and Tea ProcessingBeverage & Brewing
Applications3
Thickness0.3–3mm
Added to inquiry list